2 – 144 Fiber Optic Outdoor Cable Black Sheath Strength Member Fiber Optic Cable
GYFTY Fiber Optic Outdoor Cable Non – Armored Strength Member Fiber Optic Cable
The fibers, 250um, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member.The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After the cable core is filled with the filling compound to protect it from water ingress. the cable is completed with a PE sheath.
2. Optical Characteristics
|Bandwidth (Class A)||@850nm||≥500MHz•km||≥200MHz•km|
|Cable Cut-off Wavelength λcc||≤1260nm||≤1450nm|
3. Technical Parameters
|Tubes Count||Cable Diameter
Transport/Storage/Operating Temperature: -40Ċ～+70Ċ.
All data in the table are for reference and subject to change without notification.
Good mechanical and environmental performance.
Comply with standard YD/T 901-2009 as well as IEC 60794-1.
High strength loose tube that is hydrolysis resistant.
Special tube filling compound ensure a critical protection of fiber.
Crush resistance and flexibility.
PE sheath protects cable from ultraviolet radiation.
The following measures are taken to ensure the cable watertight:
Single Fiber Reinforced Plastic as the central strength member.
Loose tube filling compound.
100% cable core filling.