factory low price 1 Km Price Om3 Fiber Optic Cable - TRUNK CABLE MTP-HD TO LC-HD MULTIMODE FIBER PATCH CORD PUSH PULL TAB MTP TO LC UPC DUPLEX CABLE – Evolux Lighting

1M MTP Female to 6 LC UPC Duplex 12 Fibers OM4 50/125 Multimode HD Harness Cable, Polarity A, LSZH Bunch

MTP-HD to LC-HD (High Density ) fiber patch cables allow high-density connections between network equipment in telecommunication rooms. The Push/Pull tab connector can be removed using a simple pull tab, eliminateing the need for finger access to the connectors release mechanism in dense applications.
Product Specifications
Connector A Push Pull Tab MTP Connector B LC UPC Duplex
Fiber Mode OM4 50/125μm Wavelength 850/1300nm
Insertion Loss MTP≤0.35dB, LC≤0.15dB Return Loss MTP≥20dB, LC≥30dB
Jacket OD 3.0mm Fan-Out Diameter 2.0mm
Installation Tensile Load 100 N Long-Term Tensile Load 50 N
Storage Temperature -40°C to +85°C Operating Temperature -10°C to +70°C
Cable Jacket LSZH Fiber Count 12 Fibers

Features:

· With 12-fiber and 24-fiber MPO/MTO connector standard
· Available in OS1/2, OM2, OM3 and OM4
· Available in FC,LC, SC, ST, MU, and MTP
· Interface polished type has PC, UPC and APC
· Support use in attaching directly to 40/100G transceivers
· 100% factory tested, with test results included for each assembly
· Polarity options are TIA style A, B, or C (Method B is standard)
· For transition from trunk backbone assemblies to fiber rack system
· Discrete connectors are heat-cured and use ceramic ferrules and sleeves
· Fan-out fibers from MPO/MTP connectors into individual simplex or duplex
· Used in conjunction with frame (Zero-U) or Flush Mount 1RU panels, and direct connect into SAN equipment
· Customized for length, staggering, connector type, breakout style, fiber count, and labeling

“All in One” MTP Harness Cable
Push/pull tab connectors easy to install and remove with one hand

100% tested for ultra low insertion loss and back reflection

BIF allow routing through tight spaces with no impact on performance

Improved Designed Fiber Patch Cables for High-Density Applications

1. Multi-fiber Termination Push-on
Known for compact design and simple insertion and removal.
2. High-strength Closed Mesh Sheath
Ensures snag-free handling and creats optimal cable orientation and limits cable crossing.
3. Bend Insensitive Fiber & LSZH Jacket
High-performance bend insensitive fiber & low-smoke-zero-halogen property is optimal for high density data center areas.