LC APC DX Adapter without ear
A fiber optic adapter or coupler is a special passive component designed to mate or connect two ends of a fiber optic cable with high precision. Fiber optic adapters mate two ends of different fibers optic connectors, achieving the conversion between different connectors FC, SC, ST,LC, MTRJ, MPO, E2000 and so on. They are widely used for Optical Distribution Frame (ODF),fiber optic communication device and equipment, with excellent performance, good stability. We can also call them Fiber optic Flange or Coupler.
| Connector Type | LC |
| Polish Type | APC |
| Fiber Mode | Single mode |
| Fiber Counts | Duplex |
| Insertion Loss | ≤0.2dB |
Specification
|
Parameter |
Unit |
LC,SC,FC,ST,MTRJ,MPO |
|||
| SM | MM | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss(Typical) | dB | ≤0.2dB | ≤0.2dB | ≤0.2dB | ≤0.2dB |
| Return Loss | dB | ≧45 | ≧50 | ≧60 | ≧30 |
| Exchangeability | dB |
≤0.2dB |
|||
| Repeatability | dB |
≤0.2dB |
|||
| Durability | Time |
>1000 |
|||
| Operating Temperature | ℃ |
-40~75 |
|||
| Storage Temperature | ℃ |
-40~85 |
|||
Features
1.Good Protection with Dust Cap
The fiber optic adapter is loaded with corresponding dust cap to prevent it from dust and keep it clean.
2.Simply Connecting Two Fiber Optic Cables
Allowing two devices to communicate from a distance through a direct connection with the fiber optic line.
3.High-precision Ceramic Sleeve
The internal ceramic sleeve is high precision to ensure maximum connection between fiber jumpers.
Application
Local Area Network
Optical fiber communication system
Optical access network(OAN)
Optical CATV
Optical fiber sensor
Fiber optics data transmission(FODT)
Active device termination
Equipment test
