LC MM OM3 Adapter without ear
Fiber optic adaptors are used either within fiber patch panels and other termination units, or externally to interconnect pre terminated fiber cables. Panel mounting is undertaken either by screws or a retaining nut that screws onto the adaptor.
Available in Multi mode and Single mode options with either a phosphor bronze or ceramic alignment sleeve for higher precision ensuring low insertion and return loss
LC fiber optic adapter adopts the modular jack latch mechanism which is easy to operate. Using the smaller pins and sleeves, LC fiber optic adapter greatly increases the density of fiber optic connector. There are three types of LC fiber optic adapter in simplex, duplex and quad structures.
| Connector Type | LC |
| Polish Type | UPC |
| Fiber Mode | Multi mode |
| Fiber Counts | Simplex |
| Insertion Loss | ≤0.2dB |
Specification
|
Parameter |
Unit |
LC,SC,FC,ST,MTRJ,MPO |
|||
| SM | MM | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss(Typical) | dB | ≤0.2dB | ≤0.2dB | ≤0.2dB | ≤0.2dB |
| Return Loss | dB | ≧45 | ≧50 | ≧60 | ≧30 |
| Exchangeability | dB |
≤0.2dB |
|||
| Repeatability | dB |
≤0.2dB |
|||
| Durability | Time |
>1000 |
|||
| Operating Temperature | ℃ |
-40~75 |
|||
| Storage Temperature | ℃ |
-40~85 |
|||
Features
Accurate Mechanical Dimensions
Low Insertion Loss,high return loss
Excellent compatibility
Excellent repeatability
Excellent Temperature stability
No Polishing, no Epoxy
More Convenient to install
Application
Local Area Network
Optical fiber communication system
Optical access network(OAN)
Optical CATV
Optical fiber sensor
Fiber optics data transmission(FODT)
Active device termination
Equipment test
