Manufacturer of Sm Mm Indoor Fttb Optic Fiber Cable - SC UPC-SC UPC MM SX 3.0mm Patch Cord – Evolux Lighting

SC/UPC-SC/UPC MM OM4 DX 2.0 3.0MM PATCH CORD

We offer an SC-SC 2 meter fiber optic patch cord. The 9 micron SC patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The SC fiber optical cord is OS1 9/125 Duplex Fiber Cable. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The SC/SC patch cord is assembled with SC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex yellow fiber cable. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex SC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Cablesys SC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.

Specification

Features

Protection of stainless steel tube with small caliber.

Avoid the damage of torsion.

High tensile coefficient and stress coefficient.

Convenient for application, highly security.

Application without damage to cable.

Manufacture without damage to cable.

Cost cutting for maintenance.

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test

Order information