Massive Selection for Fc/sc Fiber Optical Patch Panel - MTP FEMALE TO 6 LC UPC DUPLEX 12 TO 144 FIBERS MTP MPO FIBER BREAKOUT CABLE – Evolux Lighting

MPO/MTP harnesses cables are usually divided into three types of MTP-MTP connector, MTP-Common connector and MTP-Secure Keyed LC connector, according to different colors divided into SM, MM and 10G MM. The fiber cores range from 8 to 144.
The Harness MPO(MTP) cables are offered for various applications for all networking and device needs like 100 Gig modules including CFP, CFP2 and CFP4 series. All of our MPO(MTP) harness cables meet IEC 1754-7 and TIA/EIA 604-5 standards.
.
Product Specifications
Connector A Push Pull Tab MTP Connector B LC UPC Duplex
Fiber Mode OM3 50/125μm Wavelength 850/1300nm
Insertion Loss MTP≤0.35dB, LC≤0.15dB Return Loss MTP≥20dB, LC≥30dB
Jacket OD 3.0mm Fan-Out Diameter 2.0mm
Installation Tensile Load 100 N Long-Term Tensile Load 50 N
Storage Temperature -40°C to +85°C Operating Temperature -10°C to +70°C
Cable Jacket LSZH Fiber Count 12 Fibers

“All in One” MTP Harness Cable
Push/pull tab connectors easy to install and remove with one hand

100% tested for ultra low insertion loss and back reflection

BIF allow routing through tight spaces with no impact on performance

Improved Designed Fiber Patch Cables for High-Density Applications

1. Multi-fiber Termination Push-on
Known for compact design and simple insertion and removal.

2. High-strength Closed Mesh Sheath
Ensures snag-free handling and creats optimal cable orientation and limits cable crossing.

3. Bend Insensitive Fiber & LSZH Jacket
High-performance bend insensitive fiber & low-smoke-zero-halogen property is optimal for high density data center areas.