Massive Selection for Fiber Optic Mini Plc - LC UPC-LC UPC MM DX OM4 3.0mm Patch Cord red purple – Evolux Lighting

LC/UPC- LC/UPC MM OM4 DX 3.0MM PATCH CORD

Patch cords are classified by transmission medium (long or short distance), by connector construction and by construction of the connector’s inserted core cover

The connector’s inserted core cover conforms to APC, UPC, or PC configuration. A UPC inserted core cover is flat and is used in SARFT and early CATV. An APC connector’s inserted core cover is oblique (about 30 °, ±5 °).To reduce the back reflection of a connector,UPC polish. Industry standard is a minimum of–40 dB for PC back reflec-tion measurement and–50 dB for UPC back reflection measurement. If even less back reflection is required, an APC might be necessary. An APC connector has an 8ºangle cut into the ferrule. These connectors are identifiable by their green color. An APC polished connector has an Indus-try Standard Minimum of–60 dB measurement. APC fiber ends have low back reflection even when disconnected.

Specification

Features

Accurate Mechanical Dimensions

Low Insertion Loss,high return loss

Excellent compatibility

Excellent repeatability

Excellent Temperature stability

No Polishing, no Epoxy

More Convenient to install

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test

Order information