OEM Factory for Fiber Cord - ST SM DX Metal Adapter – Evolux Lighting

Short Description:

ST SM DX Metal Adapter Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. We supplies a wide ran...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for Fiber Optic Adapter Laser Protection , Optic Flange Adapter , Passive Optical Plc Splitter , We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.

OEM Factory for Fiber Cord - ST SM DX Metal Adapter – Evolux Lighting Detail:

ST SM DX Metal Adapter

Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. We supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapter

Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).

Connector Type	ST
Polish Type	UPC
Fiber Mode	Single mode
Fiber Counts	Duplex
Insertion Loss	≤0.2dB

Specification

Parameter	Unit	LC,SC,FC,ST,MTRJ,MPO
		SM			MM
		PC	UPC	APC	PC
Insertion Loss(Typical)	dB	≤0.2dB	≤0.2dB	≤0.2dB	≤0.2dB
Return Loss	dB	≧45	≧50	≧60	≧30
Exchangeability	dB	≤0.2dB
Repeatability	dB	≤0.2dB
Durability	Time	>1000
Operating Temperature	℃	-40~75
Storage Temperature	℃	-40~85

Features

Accurate Mechanical Dimensions

Low Insertion Loss,high return loss

Excellent compatibility

Excellent repeatability

Excellent Temperature stability

No Polishing, no Epoxy

More Convenient to install

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test

Product detail pictures:

Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for OEM Factory for Fiber Cord - ST SM DX Metal Adapter – Evolux Lighting, The product will supply to all over the world, such as: Paraguay , Russia , Paraguay , With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.

Alcatel-lucent Sfp-100-bx20nu 155m Sfp Bidi