OEM Factory for Ftth 2×16 Plc Splitter - MTRJ-MTRJ MM SX 2.0mm Patch Cord Orange – Evolux Lighting

MTRJ-MTRJ MM SX 2.0MM PATCH CORD

With MTRJ to MTRJ termination, this high quality fiber optic patch cable is specifically designed for ethernet, multimedia, or communication applications. The MTRJ connector features an easy-to-use latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. With its small footprint design, the MTRJ connector can increase the port density.

The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 62.5/125 multimode fiber, immune to electrical interference.

Specification

Features

Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 2.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
Crush Resistance: 750 N/cm
Impact Resistance: 1,000 cycles

Flex Resistance: 5,000 cycles
Attenuation at 1300 nm: 1.0 dB/km
Attenuation at 850 nm: 3.5 dB/km
Operating Temperature: -20°C to +70°C

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test

Order information