Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug - ST MM SX Adapter – Evolux Lighting

Short Description:

ST MM SX Adapter A fiber optic adapter or coupler is a special passive component designed to mate or connect two ends of a fiber optic cable with high precision. Fiber optic adapters mate two ends of different fibers optic connectors, achieving the conversion between different connectors FC, SC, ST,LC, MTRJ, MPO, E2000 and so on. They are widely used for Optical Distribution Frame (ODF),fiber optic communication device and equipment, with excellent performance, good stability. We can also cal...


Product Detail

Product Tags

Related Video

Feedback (2)

Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Fiber Quick Connector , Single Mode Fiber Connector Types , Fiber Optic Cable Lc Connector , We also ensure that your choice is going to be crafted with the highest good quality and dependability. Be sure to feel free of charge to contact us for additional information.
Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug - ST MM SX Adapter – Evolux Lighting Detail:

ST MM SX Adapter

A fiber optic adapter or coupler is a special passive component designed to mate or connect two ends of a fiber optic cable with high precision. Fiber optic adapters mate two ends of different fibers optic connectors, achieving the conversion between different connectors FC, SC, ST,LC, MTRJ, MPO, E2000 and so on. They are widely used for Optical Distribution Frame (ODF),fiber optic communication device and equipment, with excellent performance, good stability. We can also call them Fiber optic Flange or Coupler. 

Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.

Connector Type ST
Polish Type UPC
Fiber Mode Multi mode
Fiber Counts Simplex
Insertion Loss ≤0.2dB

Specification

Parameter

Unit

LC,SC,FC,ST,MTRJ,MPO

SM     MM
PC UPC APC PC
Insertion Loss(Typical) dB ≤0.2dB ≤0.2dB ≤0.2dB ≤0.2dB
Return Loss dB ≧45 ≧50 ≧60 ≧30
Exchangeability dB

≤0.2dB

Repeatability dB

≤0.2dB

Durability Time

>1000

Operating Temperature

-40~75

Storage Temperature

-40~85

Features

Accurate Mechanical Dimensions

Low Insertion Loss,high return loss

Excellent compatibility

Excellent repeatability

Excellent Temperature stability

No Polishing, no Epoxy

More Convenient to install

Application

Local Area Network

Optical fiber communication system

Optical access network(OAN)

Optical CATV

Optical fiber sensor

Fiber optics data transmission(FODT)

Active device termination

Equipment test


Product detail pictures:

Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug -
 ST MM SX Adapter – Evolux Lighting detail pictures

Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug -
 ST MM SX Adapter – Evolux Lighting detail pictures

Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug -
 ST MM SX Adapter – Evolux Lighting detail pictures

Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug -
 ST MM SX Adapter – Evolux Lighting detail pictures


Related Product Guide:
Fibre optic 101: The new Base-8 vs the old Base-12 cable connector history and reasoning | St Fiber Connector
New Switch Architectures and the Impact to the 40/100GbE Transition in the Data Center | St Fiber Connector

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for Original Factory Suit 50mm2 Cable 12mm Terminal Hole Lug - ST MM SX Adapter – Evolux Lighting, The product will supply to all over the world, such as: Oslo , Sweden , Guyana , Our company has a skillful sales team, strong economic foundation, great technical force, advanced equipment, complete testing means, and excellent after-sales services. Our items have beautiful appearance, fine workmanship and superior quality and win the unanimous approvals of the customers all over the world.
  • The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Edward from Swiss - 2015.12.28 15:18
    The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Mary from Albania - 2015.09.29 17:23
    WhatsApp Online Chat !