Personlized Products Lc/pc-lc/pc Om3 Pvc Fiber Optic Cabling - LC UPC SM 3.0mm Connector – Evolux Lighting

LC UPC SM Connector 3.0mm

Optical fiber connectors are used in telephone exchanges, for customer premises wiring, and in outside plant applications to connect equipment and cables, or to cross-connect cables.

Most optical fiber connectors are spring-loaded, so the fiber faces are pressed together when the connectors are mated. The resulting glass-to-glass or plastic-to-plastic contact eliminates signal losses that would be caused by an air gap between the joined fibers.

Performance of optical fiber connectors can be quantified by insertion loss and return loss. Measurements of these parameters are now defined in IEC standard 61753-1. The standard gives five grades for insertion loss from A (best) to D (worst), and M for multimode. The other parameter is return loss, with grades from 1 (best) to 5 (worst)

Specification

Features

• Low insertion loss
• High return loss (low amounts of reflection at the interface)
• Ease of installation
• Low cost
• Reliability
• Low environmental sensitivity
• Ease of use

Application

CATV

Active device termination

Telecommunication networks

Metro

Local Area Networks (LANS)

Data processing networks

Test equipment

Premise installation

Wide Area Networks(WANS)