Personlized Products out Cable – Mtp Fanout Cable - LC MM DX ADAPTER WITH EAR WITHOUT RING – Evolux Lighting Detail:
LC MM DX Adapter with ear and without ring
A fiber optic adapter or coupler is a special passive component designed to mate or connect two ends of a fiber optic cable with high precision. Fiber optic adapters mate two ends of different fibers optic connectors, achieving the conversion between different connectors FC, SC, ST,LC, MTRJ, MPO, E2000 and so on. They are widely used for Optical Distribution Frame (ODF),fiber optic communication device and equipment, with excellent performance, good stability. We can also call them Fiber optic Flange or Coupler.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
| Connector Type | LC |
| Polish Type | UPC |
| Fiber Mode | Multi mode |
| Fiber Counts | Duplex |
| Insertion Loss | ≤0.2dB |
Specification
|
Parameter |
Unit |
LC,SC,FC,ST,MTRJ,MPO |
|||
| SM | MM | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss(Typical) | dB | ≤0.2dB | ≤0.2dB | ≤0.2dB | ≤0.2dB |
| Return Loss | dB | ≧45 | ≧50 | ≧60 | ≧30 |
| Exchangeability | dB |
≤0.2dB |
|||
| Repeatability | dB |
≤0.2dB |
|||
| Durability | Time |
>1000 |
|||
| Operating Temperature | ℃ |
-40~75 |
|||
| Storage Temperature | ℃ |
-40~85 |
|||
Features
Accurate Mechanical Dimensions
Low Insertion Loss,high return loss
Excellent compatibility
Excellent repeatability
Excellent Temperature stability
No Polishing, no Epoxy
More Convenient to install
Application
Local Area Network
Optical fiber communication system
Optical access network(OAN)
Optical CATV
Optical fiber sensor
Fiber optics data transmission(FODT)
Active device termination
Equipment test
Product detail pictures:
Related Product Guide:
Suppliers of coaxial cable assemblies boost release of micro types | Lc To Sc Fiber Adapter
Living the Canadian dream: 11 dos and don’ts | St Fiber Connector
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Personlized Products out Cable – Mtp Fanout Cable - LC MM DX ADAPTER WITH EAR WITHOUT RING – Evolux Lighting, The product will supply to all over the world, such as: Afghanistan , Toronto , Bulgaria , Selling our products causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.
By Norma
from Sevilla
- 2016.09.16 13:44
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Cindy
from Armenia
- 2015.06.18 19:26
