New design wall-mounting IP67 6 ports 4F optical fiber hub with LSZH material
fiberHub is a new economic fiber distributed solution for outdoor use, compare traditional products, Fiberhub is easy tooperate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, base on different situation. Fiberhub not onl used in FTTH field, but also used in FTTA or other harsh environment field.
Fiberhub application:
1. FTTH field
Traditional solution use ONU or FDH( optical network unit/fiber distribution Hub), when trunk opitcal cable arrives to outside of mansions and villas, Fiberhub can replace ONU or FDH becasue it has fiber distribution function. Inside, it can be fixed –4pcs 1*8 or 1*16 PLC, and can be put 24pcs fiber splice protection sleeves.
After mating with 1-48F IP67 preassembled waterproof connector, Fiberhub can connect each mansion and villa or low voltage silo directly. it can be fixed outside of mansions and villas, or holding pole installation. Fiberhub can reduce signal loss through less connecting node. for in factory preassembled Fiberhub, it is no need high skell operator because of no fiber splice operation. Installation efficiency can be increased by 40%
2. FTTA Field
Traitionally, remote radio unit(RRU) and building base band unit(BBU) connected by optical fiber cable, formed star network topology. Each RRU need one duplex outdoor cale link to BBU. Installation will need more time and cost will be high.
Fiberhub work as an aggregation/Demark box, link RRU and BBU togehter, From BBU to fiberhub, only need one multi-fiber hybrid cable. then fiberhub divide fibers to each cable. Then fiberhub divied fibers to each RRU through IP67 presassembled waterproof cable assemblies. RRU can get power through assembled power connector on fiberhub.
3. Trunk cable connectiong
Trunk cable needs to be fusion welded frequently because of each drum cable length limited. so connecting point is weak and need to be protected very well.
When trunk cable comes into fiberhub, it will be sealed and fixed by torsion proof cable gland( plastic or metal type) for 5mm-14mm out diameter cable, fiberhub has different accessories to fit. torsion glad can relase stress when trunk cable bending and protect fiber avoid breaking. Inside of the fiberhub, main cable and strenght member where fixed by fastener, which make sure the box an stand of 1200N pulling force long term.
4. Prospecting or Milltary communication
The cable will be replayed frequently, when prospecting or millitary communication. Normal connector and cable cannot stand frequently and high strength pulling and resue. Inside of the fiberhub, armored cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. It’s very suitable for field use, especially in star network communications. high strenght material and arc interface design make sure fiberhub work abnormally when suffer shocks.
Features and bensfits
1. High compatibility; can be assembled ODVA,Hconn( optitap comatible),Mini SC,AARC, PTLC,PTMPO or power adapter
2. Factory -sealed or field assembly
3. Strong enough: working under 1200N pulling force long term.
4. From2 to 12 ports ofr single or multifiber harsh connectors
5. Available with PLC or splice sleeve for fiber divide
6. IP67 waterproof rating
7. Wall-mouting, aerial installation or holding pole installation
8. Deccreased angle surface and hight make sure no connector interfering when operation
9. Meet IEC 61753-1 standard
10. cost effective:save 40% operating time
